Capping Machines

  Screw

The capping station is composed of a column where the cap distributor, the chute with the releasing head and the capping heads are installed.
The screw capping machines are manufactured in two versions:
PPV for pre-threaded plastic screw caps with a positive “Pick&Place” system. The capping station is equipped with closing heads having a magnetic friction to adjust the closing force and are hermetically sealed to prevent water or stream ingress.
VA for aluminium screw caps with “direct pick” system. The capping station is equipped with closing heads in stainless steel, complete with rolls that seal the cap to the container (ROP or ROPP).
In the event of no container, the head doesn’t release the cap.
The caps distributor automatically and continuously feeds the chute and it is equipped with a “no cap” sensor.
In case the machine has to treat PET/PE/HDPE bottles, the filler can be equipped with a neck holding system.

  Press-on

The capping station is composed of a column in which the cap distributor, the chute with the releasing head and the press-on closing heads are installed.
The cap is collected by a “direct pick” or by a “Pick&Place” system.
In case of no container the head doesn’t release the cap.
The caps distributor automatically and continuously feeds the chute and it is equipped with a “no cap” sensor.
In case the machine has to treat PET/PE/HDPE bottles, the filler can be equipped with a neck holding system.

  Cork

The capping station is composed of a column in which the cap grippers are installed. The grippers are made of tempered and polished stainless steel, with steady and soundless functioning avoiding cork tearing.
One set of bottle lifting pistons allow the capping phase.
In case of no container, the head doesn’t release the cap.
The caps distributor automatically and continuously feeds the chute and it is equipped with a “no cap” sensor.

  Crown

The capping station is composed of a column in which the capping heads are installed.
The caps are transferred to the closing heads by a chute.
The capping is carried out by the pressure of the conical heads, sealing the cap to the container.
In case of no container, the head doesn’t release the cap.
The caps distributor automatically and continuously feeds the chute and it is equipped with a “no cap” sensor.